V50 w646.book - ESD - Volvo
V50 w646.book - ESD - Volvo
V50 w646.book - ESD - Volvo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10 Infotainment system<br />
Phone functions (option)<br />
On/Off<br />
A handset appears in the display when the<br />
phone system is active or in standby mode. If<br />
the ignition key is turned to position 0 when<br />
the phone is in one of these mode, the phone<br />
automatically resumes this mode the next<br />
time the key is turned to position I or II.<br />
Activating the phone system<br />
Phone system functions can only be used<br />
when the phone is in active mode.<br />
– Press PHONE.<br />
– Enter the PIN code (if necessary) and<br />
press ENTER.<br />
Deactivating the phone system<br />
No calls can be received when the phone is<br />
deactivated.<br />
– Hold PHONE depressed until the phone is<br />
activated.<br />
Standby<br />
In standby mode, the audio system can be in<br />
use while calls are received. However, it is<br />
not possible to make calls when in standby<br />
mode.<br />
Putting the phone in standby mode<br />
The phone must first be in active mode before<br />
it can be put in standby mode.<br />
– Press PHONE or EXIT.<br />
Activating from standby mode<br />
– Press PHONE.<br />
Making and receiving calls<br />
If the privacy handset is raised when a phone<br />
call is started, the sound will come from the<br />
handsfree system. For information on switching<br />
between privacy handset and handsfree<br />
during a call, see page 223.<br />
To call<br />
– Activate the phone system (if necessary).<br />
– Dial the number or use the phone book,<br />
see page 223.<br />
– Press ENTER or lift the handset. Release<br />
the handset by pressing it down.<br />
Receiving a call<br />
For Auto answer, see menu option 4.3,<br />
page 225.<br />
– Press ENTER or lift the handset. Release<br />
the handset by pressing it down.<br />
Ending a call<br />
– Press EXIT or hang up the handset.<br />
Refusing a call<br />
– Press EXIT.<br />
Call waiting<br />
A two-tone signal during a phone call indicates<br />
that there is another incoming call. Answer<br />
appears on the display. The call can<br />
be refused or taken in the normal manner. If<br />
the incoming call is taken, the previous call is<br />
put on hold.<br />
Putting a call on hold/resuming a call<br />
– Press MENU.<br />
– Scroll to Hold or Hold off and press<br />
ENTER.<br />
Dialling a third party<br />
– Put the call on hold.<br />
– Dial the number of the third party.<br />
Switching between calls<br />
– Press MENU.<br />
– Scroll to Swap and press ENTER.<br />
Starting a conference call<br />
A conference call consists of at least three<br />
parties that can talk to one another. Once a<br />
conference call has been initiated, no more<br />
parties can be connected. All calls are ended<br />
when the conference call is ended.<br />
– Start two phone calls<br />
– Press MENU.<br />
– Scroll to Join and press ENTER.<br />
10<br />
221