V50 w646.book - ESD - Volvo

06 Starting and driving
Keyless drive (option)
General
Starting the car
– Depress the clutch pedal (cars with manual
gearbox) or brake pedal (cars with automatic
gearbox).
Starting with the remote control
Petrol engine
– Press in and turn the ignition dial to
position III.
Diesel engine
1. First turn the ignition dial to position II
and wait until the diesel indicator symbol
in the combined instrument panel goes
out, see page 43.
2. Following which, turn the ignition dial to
position III.
The keyless drive function allows the car to
be unlocked, driven and locked without the
need for a key, see page 104.
The ignition switch ignition dial is used in the
same way as the key. One precondition for
starting the car is that the car’s remote control
is located inside the passenger compartment
or the cargo area.
If the remote control battery is discharged
then the Keyless Drive function does not
work. In which case, start the car by using
the remote control as ignition dial.
1. Press in the catch in the ignition dial and
then pull it out from the ignition switch.
2. Insert the remote control into the ignition
switch and start in the same way
as with the ignition dial.
06
121