V50 w646.book - ESD - Volvo

07 Wheels and tyres
Emergency puncture repair
Changing the sealing fluid canister
07
The canister of sealing fluid should be
changed before the best-before date has expired,
see date label (1), or after the tyre has
been sealed. After use, the canister (6) with
holder (8) and air hose (10) should be
changed.
This change can be carried out by an authorised
Volvo workshop or following the
instructions.
IMPORTANT
Read the safety instructions on the bottom
of the canister.
WARNING
Ensure the compressor is not connected to
the 12 V socket when the canister is
changed.
Changing the canister before the bestbefore
date has expired
– Undo the two screws (2) on the orangecoloured
case (3).
– Remove the speed label (4) and date
label (1), and open the safety catch (5).
Loosen the case (3) and take it off.
– Unscrew and remove the canister (6).
– Check that the seal (7) on the new canister
is not damaged. Screw the canister into
place.
– Refit the case (3). Check that the case is
correctly fitted. Screw it on with the
screws (2).
– Affix the speed label (4) and new date
label (1) to the tyre repair kit.
Treat the removed canister as hazardous
waste.
168