1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo

Installing the Driver Software
3.1 Installing the Driver Software
Once the ISDN-Controller B1 PCI v4.0 has been installed in
your computer, it will be recognized automatically as a Plug
& Play device.
The CAPI 2.0 interface and the AVM NDIS WAN CAPI Driver
are available on your system. For details about the AVM ISDN
NDIS WAN CAPI Driver and the other two AVM system drivers,
see the section “The AVM System Drivers” on page 67.
3.2 Changing the Settings
After installation is concluded, you have the opportunity to
enter or change the MSNs. To do so, proceed as follows:
1. Open “Start / Control Panel / Hardware and Sound /
Device Manager / Show Hardware and Devices”.
2. Confirm the query from the User Account Control by
clicking “Continue”.
3. Click the plus sign “+” next to “Network adapters” to
expand the node.
4. Click the entry “AVM ISDN-Controller B1 PCI” with the
right mouse button.
5. Click the “Properties” command and select the “ISDN”
page.
6. On this settings page, click the “Configure” button. Enter
the Multiple Subscriber Number (MSN) for the ISDN
NDIS WAN CAPI Driver.
If the current driver software from AVM is installed on your
system, the “Device Manager includes an additional Advanced”
settings page which allows you to enable Direct
Dial-in.
14 ISDN-Controller B1 PCI v4.0 – 3 Installation in Windows Vista