1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8.2 Changing the Settings<br />
Changing the Settings<br />
After installation has been concluded, you have the option of<br />
changing the following settings of the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong><br />
<strong>v4.0</strong>:<br />
� D-channel protocol: DSS1 (Euro <strong>ISDN</strong>), NI1, 5ESS, 1TR6<br />
� enable automatic data compression (CAPI SoftCompression<br />
X75/V42bis)<br />
Open the “<strong>B1</strong> Setup” program from the “<strong>AVM</strong>” program<br />
group and follow the instructions there.<br />
Information on CAPI SoftCompression can be found in the<br />
section “CAPI SoftCompression X75/V42bis” on page 69.<br />
8.3 Installing Additional <strong>Controller</strong>s<br />
Up to four active <strong>AVM</strong> <strong>ISDN</strong>-<strong>Controller</strong>s can be installed in<br />
your computer. Active <strong>AVM</strong> <strong>ISDN</strong>-<strong>Controller</strong>s for the ISA, <strong>PCI</strong>,<br />
PCMCIA buses and USB can also be combined in the same<br />
system.<br />
To install an additional <strong>ISDN</strong>-<strong>Controller</strong> for the <strong>PCI</strong> bus, simply<br />
insert it in a suitable slot as described in “Installing the<br />
<strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong>” on page 12 and start Windows.<br />
Make your settings in the dialogs as described in the section<br />
“Installing the Driver Software” on page 36. That’s all!<br />
If you want to add another active <strong>ISDN</strong>-<strong>Controller</strong>, carry out<br />
the controller installation procedure as described in the appropriate<br />
manual. USB devices such as the <strong>B1</strong> USB are recognized<br />
by the Plug & Play mechanism.<br />
<strong>The</strong> driver software for all installed <strong>ISDN</strong>-<strong>Controller</strong>s is loaded<br />
automatically when Windows starts.<br />
<strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> – 8 Installation in Windows 98 39