1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Changing the Settings<br />
After installation the CAPI 2.0 and the <strong>AVM</strong> <strong>ISDN</strong> NDIS WAN<br />
CAPI Driver are available on your system. For details about<br />
the <strong>AVM</strong> <strong>ISDN</strong> NDIS WAN CAPI Driver and the other two <strong>AVM</strong><br />
system drivers, see the section “<strong>The</strong> <strong>AVM</strong> System Drivers” on<br />
page 67.<br />
5.2 Changing the Settings<br />
After installation is concluded, you have the opportunity to<br />
change the D-channel protocol and the MSNs of the <strong>ISDN</strong>-<br />
<strong>Controller</strong>. To do so, proceed as follows:<br />
1. Select “Start / Settings / Control Panel / System”. On<br />
the “Hardware dialog page, click the Device Manager”<br />
button.<br />
2. Click the plus sign “+” next to “Network adapters” to<br />
expand the node.<br />
3. Click the entry “<strong>AVM</strong> <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong>” with the<br />
right mouse button.<br />
4. Click the “Properties” command and select the “<strong>ISDN</strong>”<br />
page.<br />
5. Select the desired D-channel protocol on this settings<br />
page and then click the “Configure...” button to enter<br />
the Multiple Subscriber Numbers for the NDIS WAN CA-<br />
PI Driver.<br />
If the current driver software from <strong>AVM</strong> is installed on your<br />
system, the “Device Manager includes an additional Advanced”<br />
settings page which allows you to enable Direct Dial-in.<br />
24 <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> – 5 Installation in Windows 2000