1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Starting Operation of the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> with Stand-Alone CAPI<br />
desired and press “Return”. Select the desired setting from<br />
the overview displayed or type the new value in the activated<br />
input field.<br />
Information on CAPI SoftCompression can be found in the<br />
section “CAPI SoftCompression X75/V42bis” on page 69.<br />
Exit the configuration by pressing “Esc”. Answer “Yes” to<br />
save your settings.<br />
<strong>The</strong> <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> settings can be changed at<br />
any time using this method.<br />
9.3 Starting Operation of the <strong>ISDN</strong>-<strong>Controller</strong><br />
<strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> with Stand-Alone CAPI<br />
Enter the following command at the system console to load<br />
the <strong>ISDN</strong>-<strong>Controller</strong>:<br />
load capi20<br />
A message appears reporting that the <strong>ISDN</strong>-<strong>Controller</strong> has<br />
been loaded and the CAPI interface is available.<br />
When using NetWare 6.x, keep in mind that the display for<br />
successful loading is shown in an extra console. This can be<br />
accessed using the key combination "Alt + Esc".<br />
Enter the following command in order to unload the <strong>ISDN</strong>-<br />
<strong>Controller</strong>:<br />
load capi20 -d<br />
<strong>The</strong> system displays a message confirming the action.<br />
44 <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> – 9 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12
Change language