1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo

Installation in Windows XP / Server 2003
4 Installation in Windows XP /
Server 2003
Special driver software developed for Windows XP is included
in the package, which can also be used in Windows
Server 2003. The CAPI 2.0 interface supports both 32-bit and
64-bit applications (Windows XP/Server 2003 x64 Edition).
Applications in DOS windows are not supported. Information
on CAPI can be found in the section “The Applications Interface
CAPI 2.0” on page 64.
Windows XP itself includes a version of the driver software
for the ISDN-Controller B1 PCI v4.0. Windows XP installs this
automatically. Once the automatic installation is complete,
install the current driver software from the installation CD.
US only: In addition to the D-channel protocol, ISDN users
in the USA must find out their SPID.
SPID stands for Service Profile IDentifier. A SPID is a number
assigned by your ISDN service provider to each subscriber interface.
SPIDs let the ISDN switch know which ISDN services
a given logical terminal (ISDN device) can access. This is particularly
important for ISDN telephones.
AVM is continuously developing the driver software for the
the ISDN-Controller B1 PCI v4.0. If a more current version of
the driver software is available, it may be obtained from the
ADC under CARDWARE\B1_PCI\WINDOWS.XP\ENGLISH.
16 ISDN-Controller B1 PCI v4.0 – 4 Installation in Windows XP / Server 2003