1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo

11 Installation in OS/2
Installation in OS/2
AVM no longer provides support for use of the ISDN-Controller
B1 PCI v4.0 with the OS/2 operating system and there is
no further development of the driver software.
For operation in OS/2 specially developed drivers are included
with delivery. Any existing OS/2 applications based on
CAPI 1.1 can also be used with this driver software. Information
on CAPI can be found in the section “The Applications
Interface CAPI 2.0” on page 64.
11.1 Installing the Driver Software
Proceed as follows to install the driver software in OS/2:
1. Insert the installation CD in your CD-ROM drive.
2. Open the “System” directory and double-click “Drives”.
Then click the icon of your CD-ROM drive. Switch to the
directory below:
\CARDWARE\B1_PCI\OS2\ENGLISH
3. Start the INSTALL.EXE program.
4. An OS/2 command-line window opens and the installation
program’s welcome screen appears. Press “Return”.
The installation can be aborted at any time by pressing
“Ctrl+x”.
5. In the next dialog you are asked whether the ISDN-Controller
B1 PCI v4.0 is to be loaded automatically every
time OS/2 is started. Enable the desired option and
confirm with “Return”.
6. Now select the D-channel protocol used on your ISDN
line: DSS1 (Euro ISDN), NI1, 5ESS or 1TR6.
7. Next specify the directory in which the driver software
for the ISDN-Controller is to be installed.
ISDN-Controller B1 PCI v4.0 – 11 Installation in OS/2 55