1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>The</strong> <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> on Point-to-Point Lines<br />
Windows NT 4.0 Server/Workstation<br />
<strong>The</strong> “<strong>B1</strong> Server Edition” developed especially for the <strong>AVM</strong><br />
products Network Distributed <strong>ISDN</strong> for Windows 2000/NT<br />
and <strong>AVM</strong> MultiProtocol Router for Windows 2000/NT provides<br />
for easy configuration over a selection menu. This setup<br />
can be obtained free of charge from the CARDWARE\<br />
SERVER.<strong>B1</strong> folder on the ADC or via the Internet (see the inside<br />
cover for the URL).<br />
<strong>The</strong> “<strong>B1</strong> Server Edition” can, of course, be used for all other<br />
CAPI applications.<br />
Windows Me/98/95 and OS/2<br />
Perform the standard installation for your operating system<br />
and exchange one single component of the driver. All necessary<br />
components and information are contained in the folder<br />
CARDWARE\<strong>B1</strong>_<strong>PCI</strong>\X_MISC on the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong><br />
<strong>v4.0</strong> installation CD.<br />
Please note that CAPI applications like fax servers must also<br />
be configured to interpret the DDI (Direct Dial-In) <strong>ISDN</strong> numbers<br />
correctly. Consult the documentation of your application<br />
for more information.<br />
Novell NetWare 6.x, 5.x, 4.x and 3.x<br />
Enable the “P2P” option in the menu for setting the D-channel<br />
protocol and restart Novell NetWare.<br />
Linux<br />
To operate the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> at a point-to-point<br />
BRI (P2P=Point-to-Point), just change the /ETC/CAPI.CONF<br />
file manually. <strong>The</strong> same is true for multiple <strong>ISDN</strong>-<strong>Controller</strong><br />
<strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong>.<br />
An example of a modified /ETC/CAPI.CONF file:<br />
# card<br />
#<br />
file proto io irq mem cardnr options<br />
<strong>B1</strong>pci b1.t4 DSS1 - - - - P2P<br />
<strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> – 12 Special Types of Lines 61
Change language