1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo

Installing the Driver Software
9.1 Installing the Driver Software
Before you begin the driver installation in Novell
NetWare 4.x or 3.12, install the operating system patch
LANDR9 or higher, available from Novell.
The following installation instructions are valid for Novell
NetWare 6.x. Minor deviations may be required for installation
in Novell NetWare 5.x, 4.x and 3.12.
In order to install the driver software, carry out the following
steps:
1. Start your computer.
2. Insert the installation CD in your CD-ROM drive.
3. Enter the following command:
load nwconfig
to load the installation menu of the Novell NetWare
server. The “Configuration Options” menu of the configuration
program appears.
4. Select the “Product Options” item from the menu and
press “Return”.
On a NetWare 3.12 server, the screen now displays a list
of the programs already installed.
Version 6.x, 5.x or 4.x NetWare servers show a menu labeled
“Other Installation Actions”. Select the “Install a
product not listed” item from the menu and press “Return”.
5. The disk drive A:\ is suggested by default. To specify
another path, press “F3”.
6. To install the driver software for the Stand-Alone version
of the ISDN-Controller, enter the following command:
:\CARDWARE\B1_PCI\
NETWARE\CAPI20\ENGLISH
To enter the driver software for the CAPI Manager, enter
the following command:
42 ISDN-Controller B1 PCI v4.0 – 9 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12