1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuring the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> with Stand-Alone CAPI<br />
:\CARDWARE\<strong>B1</strong>_<strong>PCI</strong>\<br />
NETWARE\4CAPIMGR\ENGLISH<br />
7. Confirm with “Return”.<br />
8. In the next step, select “Install on this server” and<br />
press “Return”.<br />
<strong>The</strong> files for the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> are now<br />
copied to the SYS:\SYSTEM directory.<br />
<strong>The</strong> README file for the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> is<br />
displayed on the screen, concluding the installation.<br />
9. Press “ESC” to close the display.<br />
10. Press “Esc” as often as necessary to close all submenus<br />
and return to the “Configuration Options” menu.<br />
11. Select “Exit” to leave the installation program.<br />
See the following sections for information about how to start<br />
operation and configure the <strong>ISDN</strong>-<strong>Controller</strong> with Stand-<br />
Alone CAPI.<br />
To use the CAPI Manager, read further under “<strong>ISDN</strong>-<strong>Controller</strong><br />
<strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> with CAPI for the CAPI Manager” on page 45.<br />
9.2 Configuring the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong><br />
with Stand-Alone CAPI<br />
To configure the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> with Stand-<br />
Alone CAPI, enter at the system console:<br />
load b1setup<br />
A list of available <strong>ISDN</strong>-<strong>Controller</strong>s with their I/O addresses,<br />
interrupts and D-channel protocols appears. Use the cursor<br />
keys to select the <strong>ISDN</strong>-<strong>Controller</strong> to be configured from this<br />
list and then press “Return”.<br />
<strong>The</strong> configuration window for the <strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong><br />
appears. Here you can perform the settings for the D-channel<br />
protocol, the Point-to-Point protocol (Direct Dial-In) and automatic<br />
data compression. Move the selection to the entry<br />
<strong>ISDN</strong>-<strong>Controller</strong> <strong>B1</strong> <strong>PCI</strong> <strong>v4.0</strong> – 9 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12 43
Change language