1 The AVM ISDN-Controller B1 PCI v4.0 - VoipAndGo

Installing Additional ISDN-Controllers
– Line Config (MTP = multipoint or PPT = point-topoint)
– Automatic Data Compression
Information on CAPI SoftCompression can be found in
the section “CAPI SoftCompression X75/V42bis” on
page 69.
10. Exit the configuration dialog by pressing “Esc” twice
and select “Yes” to confirm that you want to save the
new settings.
11. The final step in the configuration process is to update
the system and load the ISDN-Controller.
In the “Internetworking Configuration” window, select
the “Reinitialize System” command and confirm it by
selecting “Yes”.
12. Exit the configuration by pressing “Esc”. Answer “Yes”
to save your settings.
This concludes the configuration and loading processes for
the ISDN-Controller B1 PCI v4.0 with the CAPI Manager.
The ISDN-Controller B1 PCI v4.0 settings can be changed at
any time using this method.
9.5 Installing Additional ISDN-Controllers
If you want to install additional ISDN-Controllers, enter at the
system console:
load b1setup
In the list of available ISDN-Controllers, press “Ins”. Each
time an ISDN-Controller is installed, another ISDN-Controller
is displayed, complete with an available I/O address and interrupt
level.
46 ISDN-Controller B1 PCI v4.0 – 9 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12