18.01.2015 Views

Technical Reference Manual - InduSoft

Technical Reference Manual - InduSoft

Technical Reference Manual - InduSoft

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Tags and the Project Database<br />

8. If you selected CoDeSys 3.x, configure the corresponding settings.<br />

CoDeSys Tag Integration dialog for CoDeSys 3.x<br />

a) In the Gateway IP and Port boxes, type the IP address and port number of the device that is actually<br />

running your CoDeSys project.<br />

b) In the Runtime Address box, type the specific address of your CoDeSys project on the device.<br />

This address is can be found when you open the CoDeSys project in the CoDeSys development<br />

application.<br />

A typical address is 0194.<br />

9. If you selected CoDeSys 2.x, configure the corresponding settings.<br />

CoDeSys Tag Integration dialog for CoDeSys 2.x<br />

a) In the PLC IP Address and Port boxes, type the IP address and port number of the device that is actually<br />

running your CoDeSys project.<br />

b) If the device is located behind a network gateway, select Gateway IP and then type the IP address of the<br />

gateway.<br />

c) From the Level list, select the network protocol to communicate with the device. In most cases, you<br />

should select L4.<br />

10.If you also want to browse the CoDeSys tags when the PLC is not running, then enable offline browsing<br />

and locate the symbol file that you copied to your IWS project folder.<br />

a) Select Symbol file browsing (offline).<br />

b) Click Browse, and then locate the symbol file.<br />

11.Click OK to finish the configuration.<br />

If the configuration is successful, then the CoDeSys tags will be immediately available in the Object Finder.<br />

Page 156<br />

<strong>InduSoft</strong> Web Studio

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!