Technical Reference Manual - InduSoft

Appendix: Built-in Scripting Language
Examples
Tag Name
n/a
Expression
RegSaveCE( ) // Returned value = 0 if successful
ReloadAppFromServer
When executed on the Client, this function reloads the necessary project files from the Server while
maintaining the current state of the project on the Client.
Function Group Execution Windows Embedded Thin Client
ReloadAppFromServer System Info Synchronous Supported Supported Supported
Syntax
ReloadAppFromServer()
This function takes no paramters.
Returned value
This function always returns 0.
Notes
For this function, "Server" means the station that is actually running your project and has the TCP/IP Server
module enabled, and "Client" means a Thin Client or Secure Viewer that is communicating with the Server via
TCP/IP. For more information, see Configuring a Web Solution.
Tip: Before calling this function, you can use IsAppChangedOnServer to check the version of the
project files that are already on the Client. If the files on the Client match the files on the Server,
then you may choose not to call this function.
Examples
Tag Name
Expression
Tag ReloadAppFromServer( )
SaveAlarmFile
Use this function to enable/disable the saving feature for alarm history and to set the path where the alarm
history files must be handled.
Function Group Execution Windows Embedded Thin Client
SaveAlarmFile System Info Synchronous Supported Supported Not supported
Syntax
SaveAlarmFile( numType, optRemotePath )
numType
Tag containing the number and operation, as follows:
0 Disable save the alarm file to the local disk
1 Enable save the alarm file to local disk
Page 676
InduSoft Web Studio