Technical Reference Manual - InduSoft

About thin clients and mobile access
Note: Microsoft provides Web Servers for any Microsoft operating system. Consult your Microsoft
documentation about installing and configuring a Web Server.
6. After configuring the Web settings, click OK to close the Project Settings dialog.
7. Save and close all screens and worksheets, and then verify the project (Verify on the Home tab of the
ribbon) to update the Web settings to your Web page.
Caution: You must verify the project again any time you change the project settings.
To test your Web-based application, use the following steps:
1. Click Run (on the Home tab of the ribbon, in the Local Management group) to run your project locally on
the Server station.
2. Open an Internet Browser (Microsoft Internet Explorer or Netscape) and type the URL address to open your
main.html screen from the Server station.
3. When the Log On dialog displays in the Browser, type guest into the User Name field, then click OK to open
the main.html screen in the Browser.
Log On dialog
Notice that you can modify the level of any tank locally (Server station) using the Viewer run-time module
or remotely (Thin Client) using the Browser.
Note: A Thin Client requires an ActiveX component (ISSymbol.ocx) to handle screens on the
Browser. If you connect the Thin Client to the Internet, this component is downloaded and registered
automatically.
Page 462
InduSoft Web Studio