Technical Reference Manual - InduSoft

Screens and Graphics
Click (check) the Shift, Ctrl, and/or Alt boxes to create a combination key, meaning the Shift, Ctrl, and/or Alt
key must be pressed with the key specified in the drop-down list.
Click the browse button … to open the Key Modifier dialog, which enables you to further modify your
combination keys. You can choose Left, Right or Left or Right to specify the position on the keyboard of the
Shift, Ctrl, or Alt key in the combination key. If you choose Left or Right, the command will be executed any
time either of these keys is pressed in combination with the key specified in the drop-down list.
• Disable field: Type a tag or expression into this field to enable and disable the object. You disable the radio
button object when you enter a value different from 0.
• Security field: Type a value in this field to specify a security level for the object, as defined under Security.
When a user logs on, and does not have the specified security level, IWS disables the object.
• Tag field: When the user clicks on the radio button during runtime, the value of this tag is updated. If no
Feedback was specified, the value of this tag is also used to indicate the current status of the object.
• True Value: Specify a value that will be used to change the control to TRUE state and to indicate that the
control is in TRUE state. For more information about states, please refer to the states table.
• Advanced: Press this button to open the Advanced dialog:
Advanced dialog
• Tri-State: If enabled the control has a third state. The third state will be displayed when the tag
configured in the Feedback field assumes the value specified in the Tri-State field. If the Feedback field is left
in blank, the third state will be displayed when the tag configured in the Tag field assumes the value
specified in the Tri-State field.
Caution: The Tri-State field must not be configured with the same value as the True Value field,
nor with an empty string value.
• Feedback: Value that indicates the state of the object (FALSE, TRUE, or TRI-STATE). When the value of
the tag configured in Feedback is equal to the value of the tag configured in True Value, the state is set to
TRUE. When the value of the tag configured in Feedback is equal to the value of the tag configured in
Tri-State, the state is set to TRI-STATE. When none of these conditions are satisfied, the state is set to
FALSE. If the Feedback field is left in blank, then the tag configured in the Tag field will be used as the
Feedback tag.
• Ext Trans.: When this option is checked, the caption of the object supports the translation.
• Auto gray out: Turns the caption of the object to gray when it is disabled by the Disable field or due to the
Security System.
• Force: Click (check) this box to force the Tag Database to recognize a tag change when the user clicks on
the object, even if the value of the tag in question does not change.
• Enable Focus: When this option is checked, the object can receive the focus during runtime by the
navigation keys.
• Push Like: When this option is checked the control is displayed as a button, instead of the standard radio
button standard shape.
• Fill Color: Specify the fill color for the button. This option is enabled only when the Push Like option is
checked.
• Auto Format: When checked, if the caption includes a decimal value enclosed by curly brackets (e,g,
{1.2345}) or a tag of Real type (see Caption above), then the value will be formatted according to the
virtual table created by the SetDecimalPoints() function.
InduSoft Web Studio Page 191