18.01.2015 Views

Technical Reference Manual - InduSoft

Technical Reference Manual - InduSoft

Technical Reference Manual - InduSoft

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Licensing<br />

Installing or Upgrading a CEView License (Remotely)<br />

Tip: You can purchase some Windows Embedded devices with a CEView softkey license already<br />

installed. Ask your software vendor about this possibility.<br />

You can register a CEView license on your Windows Embedded device by using IWS to send the license to the<br />

device. This works for both hardkey and softkey licenses.<br />

To install a new (or upgrade an existing) CEView license (remotely):<br />

1. Perform the four first steps described in the previous section.<br />

2. In the Setup dialog, specify the Device Connection type by clicking (enabling) the Serial Port or TCP/IP radio<br />

button. (If you enable Serial Port, you also must select a port from the combo-box list). Click OK to close the<br />

dialog.<br />

3. Connect your development workstation to the Windows Embedded device using either a serial or TCP/IP<br />

link.<br />

4. Run the IWS development application.<br />

5. On the Home tab of the ribbon, in the Remote Management group, click Connect. The Remote Management<br />

dialog is displayed:<br />

Remote Management dialog<br />

6. Specify a target system by clicking one of the following radio buttons in the Target System:<br />

• Network IP, and then type the IP address into the field provided<br />

• Serial Port, and then select a port from the combo-box list provided<br />

• Microsoft ActiveSync<br />

Note: You cannot upgrade a CEView hardkey license via Microsoft ActiveSync.<br />

7. When the Connect button becomes active, click the button to connect to the Windows Embedded device on<br />

which the Remote Agent is running. (If you select Network IP, then you must also enter the IP address in the<br />

text box provided.)<br />

Tip: TCP/IP links provide better communication performance than serial links.<br />

The Status field must display the following message: Connected to CEView version<br />

8. Select the Embedded License tab to see which license settings are currently installed on your Windows<br />

Embedded device.<br />

9. From the License Codes section, copy the information from the Site Code field and send it to your software<br />

vendor.<br />

Page 56<br />

<strong>InduSoft</strong> Web Studio

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!