Technical Reference Manual - InduSoft

Testing and Debugging
Using Remote Tools
Remote Database Spy
You can use the Remote Database Spy tool to monitor the Database Spy of a project running on a remote
computer. The project must have the Database Spy execution task enabled, and the remote computer must be
in runtime.
To use the Remote Database Spy tool:
1. On the Home tab of the ribbon, in the Remote Management group, click Database Spy. The Remote Computer
dialog is displayed.
2. Enter the IP address of the remote computer, as shown below.
Entering a Remote IP
Note: The IP address 192.168.1.52 is only an example. Please verify the IP address of the
computer to which you want to connect.
3. Click OK to connect to the specified address. If the connection is good, then the Remote Database Spy
window is displayed.
Remote Database Spy
Note: You cannot add or remove tags remotely; the Database Spy tag list must be configured on
the remote computer itself.
When you are done, click Close to disconnect from the remote computer.
Remote LogWin
You can use the Remote LogWin tool to monitor the Output log (LogWin) of a project running on a remote
computer. The project must have the LogWin execution task enabled, and the remote computer must be in
runtime.
To use the Remote LogWin tool:
1. On the Home tab of the ribbon, in the Remote Management group, click LogWin. The Remote Computer
dialog is displayed.
Page 416
InduSoft Web Studio