Technical Reference Manual - InduSoft

Creating a New Project
2. Click Configure. The Default Database Configuration dialog is displayed.
Default Database Configuration dialog
Please refer to Database Configuration dialog for help completing the fields in this window.
DATABASE CONFIGURATION
The Database Configuration dialog allows you to configure the necessary settings to link IWS to an external
database file.
Database Configuration dialog
• Database combo-box: Allows you to select either Primary or Secondary. With Primary, all settings displayed
in the Database Configuration window apply to the Primary Database interface. Otherwise, they apply to
the Secondary Database interface. You can configure the Secondary database in the following modes:
• Disabled: In this mode, IWS saves data in the Primary Database only. If the Primary Database is
unavailable for any reason, the data is not saved anywhere else. This option may cause loss of data if
the Primary Database is not available.
• Redundant: In this mode, IWS saves data in both Primary and Secondary Databases. If one of these
databases is unavailable, IWS keeps saving data only in the database that is available. When
the database that was unavailable becomes available again, IWS synchronizes both databases
automatically.
• Store and Forward: In this mode, IWS saves data in the Primary Database only. If the Primary Database
becomes unavailable, IWS saves the data in the Secondary Database. When the Primary Database
becomes available again, IWS moves the data from the Secondary Database into the Primary Database.
Note: The Primary and Secondary can be different types of databases. However, they must have
the same fields.
Using the Secondary Database, you can increase the reliability of the system and use the Secondary
Database as a backup when the Primary Database is not available. This architecture is particularly useful
when the Primary Database is located in the remote station. In this case, you can configure a Secondary
Page 88
InduSoft Web Studio