Technical Reference Manual - InduSoft

Installation
The Remote Management dialog box is displayed.
c) Select the appropriate connection type for the target system: Network IP, Serial Port, or Microsoft ActiveSync. If
you select Network IP, then also type the IP address of the target system. If you select Serial Port, then also
select the COM port and verify the advanced serial communication settings.
d) Click Connect.
If you are successfully connected, then the connection status is shown in the Status box and the target
system's specifications are shown in the Platform box. If you are not connected, then check both the
connection settings and the physical connections.
Note: In some cases, the Remote Management tool may not be able to connect via Microsoft
ActiveSync to a device running Windows CE 6.0 or later. This is because of a problem in the
default configuration of Windows CE 6.0. You can fix the problem by using a small utility that
is included with InduSoft Web Studio. The utility is located at:
C:\Program Files\InduSoft Web Studio v7.1\Redist\ActiveSyncUnlock.exe
Copy this file to the device using the stand-alone version of Microsoft ActiveSync and then
execute the file on the device. It does not matter where on the device the file is located. When
this is done, try again to use the Remote Management tool to connect to the device.
If you still cannot connect via Microsoft ActiveSync, then empty the device's \Temp directory
and try again.
5. Install the rest of the EmbeddedView or CEView software on the target system.
a) In Remote Management, click Install system files.
When the installation is finished, the target system's updated status is displayed in the Status box.
With EmbeddedView or CEView installed on the target system, you can now use it as a project runtime server
and/or client.
Note: The following run-time features are supported by the full InduSoft Web Studio software but
not by EmbeddedView and CEView:
• DDE task worksheets.
• ODBC task worksheets and built-in functions. (ADO interface is supported.)
• Third-party .NET controls.
• OPC HDA Server.
• OPC UA and OPC .NET clients
• Some minor graphic features, such as fill effects for shapes other than rectangle, picture formats
other than BMP or JPG, and Ellipse style.
• Some built-in functions. For more information, see the individual function descriptions.
InduSoft Web Studio Page 39