Technical Reference Manual - InduSoft

About thin clients and mobile access
Larger widgets are clearer and easier to use on mobile devices, but they also take up more screen
space.
h) In the Write Access Level box, type the minimum security level that the user must have in order to write
new values to project tags.
Configure the Mobile Access global settings
Configure the Mobile Access global settings in order to set certain default values — such as alarm columns
and colors, trend control duration, and update rates — that will apply to all areas of the Mobile Access
website.
To configure the global settings:
1. Do one of the following:
• On the Project tab of the ribbon, in the Thin Clients group, click Mobile Access.
• On the Graphics tab of the Project Explorer, double-click Thin Clients > Mobile Access.
The Mobile Access Configuration worksheet is opened for editing.
2. Click the Global Settings tab of the worksheet.
The Global Settings worksheet is displayed.
Global Settings worksheet
3. In the Alarm Control area, select and arrange the columns to be displayed in the alarm control.
The available columns are listed on the left. The displayed columns are listed on the right. For more
information about the columns, see Alarm/Event Control object on page 255.
Note: These settings can be overriden by the user in the client-side settings.
a) To display a column, select it in the list of available columns and then click the >> button.
b) To hide a column, select it in the list of displayed columns and then click the