Technical Reference Manual - InduSoft

Tags and the Project Database
8. In the Category list, click Symbol configuration.
9. Select Dump symbol entries and Dump XML symbol table.
10.Click Configure symbol file.
The Set object attributes dialog is displayed.
Selecting "Symbol configuration"
11.For the sake of expediency, you should first disable the export of all objects and then reenable only the
objects that you want to export to IWS — typically, the POUs and Global Variables. Select all of the objects
in the tree and then clear all options for them at the bottom of the dialog.
Clearing the options for all objects
Tip: You may need to select Export variables of object in order to activate the other checkboxes before
clearing them.
12.Reselect only the POUs and Global Variables that you want to export to IWS. Do not select libraries. With
the objects selected, select all of the options at the bottom of the dialog.
13.Click OK to close the Set object attributes dialog, and then click OK again to close the Options dialog.
Page 160
InduSoft Web Studio