Technical Reference Manual - InduSoft

Project Security
Configuring the server settings for Security Mode: Domain (LDAP)
To configure the server settings:
Server Settings dialog for Security Mode: Domain (LDAP)
1. In the Domain box, type the domain name of the LDAP server.
2. In the User and Password boxes, type your logon credentials for the LDAP server.
Note: You must have sufficient privileges to get lists of groups and users. Please consult your
LDAP administrator.
3. In the Connection timeout box, type the timeout (in seconds) after which the client will attempt to reconnect to
the LDAP server. (A typical connection timeout is 4–5 seconds.)
4. In the Retry interval box, type the frequency (in seconds) at which the client will try to connect to the LDAP
server if the connection could not be established.
5. In the Status tag box, type the name of a project tag (Integer type) that will receive a value indicating the
status of the server connection.
While the project is running, the possible values are:
Value
Description
0 Connection timeout
1 Bind timeout
2 Query timeout
3 Disconnected
4 Connected
5 No users or groups returned by query
6 Invalid user or group
For more information, see GetSecuritySystemStatus.
6. Click Check Connection to confirm that the project can connect to the specified domain. If it cannot, review
and correct your settings.
7. Click OK.
Page 378
InduSoft Web Studio