Technical Reference Manual - InduSoft

About thin clients and mobile access
The Ack screen is displayed.
c) Type a comment that will be saved with the acknowledged alarms, and then click/tap Confirm.
The alarms are acknowledged.
3. To change the grid columns for a specific Alarm control:
a) Click/tap the Settings button .
The Settings screen is displayed with a list of all of the available grid columns and a toggle switches for
each column.
b) Click/tap the switches to turn the columns on or off.
c) Click Alarm to apply your changes and return to the previous screen.
4. To return to the home screen, click/tap the Return button .
USE THE PROCESS VALUES CONTROL
Use the Process Values control to view tag values as graphical widgets and also to update selected tags.
The Process Values control is similar to the Symbols library. It uses various pre-made widgets (i.e., gauges
and switches) to graphically represent project tag values. It can also allow the user to change the values
during run time, depending on how you configure the widgets.
An example of the Process Values control
All widgets are continuously updated to show the current values of their associated project tags.
If a widget is highlighted blue, then its associated project tag is writable. That means the user can use the
widget to set a new value for the tag.
To use the Process Values control:
1. To change a value:
a) Click/tap the widget.
The widget must be highlighted blue, to indicate that the tag is writable.
A new screen with an enlarged version of the widget is displayed.
b) Either manipulate the widget (i.e., toggle the switch, move the gauge) to set the new value, or type the
new value in the text box below the widget.
c) Click/tap Write.
The new value is written to the tags database.
2. To return to the home screen, click/tap the Return button .
InduSoft Web Studio Page 477