Wavelink Avalanche Site Edition Java Console User Guide

Chapter 12: Managing Mobile Device Groups 148
• Static Mobile Device Groups. A static mobile device group contains all
the mobile devices in your inventory that match a set of configured
selection criteria.You configure the selection criteria when the group is
created, and then the devices currently in the Mobile Device Inventory
that match the selection criteria are added to the group.
If a new device matching the selection criteria for a static mobile device
group connects to the Avalanche Console, it will not automatically be
placed in the mobile device group. You will need to manually add or
delete devices in the group. Refer to the following sections for managing
static mobile device groups:
• Adding Devices to Static Mobile Device Groups
• Removing Devices from Static Mobile Device Groups
To create a mobile device group:
1 Select the Device Groups tab.
2 Click Add Group
The Create Device Group dialog box appears.
3 Type a name for the group.
4 To enable the group, select Enabled from the drop‐down list.
5 Choose whether you want the group to be Static or Dynamic.
6 Click OK.
The group appears in the Device Groups List.
Adding Devices to Static Mobile Device Groups
If you have added mobile devices to your network, you can add those devices
to a static mobile device group as long as they meet the group’s selection
criteria.
To add mobile devices to a static mobile device group:
1 Select the Device Groups tab.
2 Select the static mobile device group from the Device Groups List.