Wavelink Avalanche Site Edition Java Console User Guide

Chapter 13: Managing Alert Profiles 157
Removing Alert Profiles
If you determine that an alert profile is unnecessary, you can delete it from the
Avalanche Console. When you remove a profile from the Console, devices that
are assigned to that profile retain those settings until you assign a new alert
profile to the device.
To remove an alert profile:
1 From the Profiles tab, select the profile you want to remove and click
Remove Profile.
2 Click Yes to confirm that you want to remove the profile.
The profile is removed from the Profiles List.
Adding Profiled Contacts
Each alert profile can notify one or more e‐mail addresses when specified
events occur. If you want the Avalanche Console to notify you of an alert by
e‐mail, you must add the e‐mail address to the Profiled Contacts list for that
profile. The entire contact list will receive e‐mails for all alerts generated by
that profile.
NOTE You must configure the e‐mail settings in the Preferences dialog box
before Avalanche can e‐mail you when alerts are generated. For information
on configuring e‐mail settings, see Configuring E‐mail Settings on page 35.
To add e-mail contacts to an alert profile:
1 On the Profiles tab, select the profile you want to configure from the
Profile List.
2 Click Edit.
3 In the Profiled Contacts tab, click Add.