Wavelink Avalanche Site Edition Java Console User Guide

Chapter 7: Managing Network Profiles 74
Custom Properties
Enable TCP/IP header
compression
Enable software
compression
Activate phone as
needed
Dial broadband
connection as needed
Public IP address for
Avalanche Server
This option allows you to add custom properties to
the devices that receive this network profile. By
clicking Edit/View, you can add, edit, and delete
properties and their values.
Improves the performance of low‐speed
connections.
Improves the performance of low‐speed
connections.
Allows the Enabler to activate the device’s phone if a
WWAN connection is necessary.
Allows the Enabler to attempt a WWAN connection
if a LAN connection cannot be established.
Provides the IP address of the enterprise server that
is accessible from a WWAN. This is necessary if the
device tries to contact the server when connected
through a WWAN network outside of the server’s
local network.
To configure WWAN settings:
1 From the Profiles tab, select the network profile from the Profile List.
2 Click Edit.
3 In the Network Profile tab, enable the Manage WWAN option.
4 In the Scheduled Settings region, select which epoch you want the
settings effective for from the drop‐down list. If you would like to add an
epoch to the drop‐down list, click Add and select the date and time you
want the epoch to begin.
5 Select the WWAN Settings tab.
6 Configure the WWAN settings as desired.
7 Save your changes.