Optimod-AM 9400 V1.2 Operating Manual - Orban

2-58
INSTALLATION ORBAN MODEL 9400
PC. Then click the “Update Now” button on PC Remote.
E) Navigate to Optimod PC Remote’s SETUP/ UTILITY tab and click the SET 9400
CLOCK button.
If you are running Windows XP, PC Remote will download your computer’s
currently specified timeserver into your Optimod.
PC Remote will adjust your Optimod’s OFFSET setting to correspond to your
computer’s time zone setting.
PC Remote will synchronize your Optimod’s clock with your computer’s
clock.
F) It is wise to disconnect from PC Remote and then to press the SYNC NOW button
on your Optimod [step (4.B) on page 2-56]. This is to test the ability of
your Optimod to synchronize to the selected timeserver and to ensure that
your Optimod’s clock is set accurately.
NOTE: Manually setting your Optimod’s clock via Set Time, Set Date, Daylight
Time, and the remote contact closure Reset to Hour and Reset to Midnight will
not work when the automatic synchronization function is active. To inactivate
this function (thereby permitting manual setting to work), set the SYNC PERIOD to
OFF.