Optimod-AM 9400 V1.2 Operating Manual - Orban

OPTIMOD-AM DIGITAL INSTALLATION 2-1
Section 2
Installation
Installing the 9400
Allow about 2 hours for installation.
Installation consists of: (1) unpacking and inspecting the 9400, (2) checking the line
voltage setting, fuse, and power cord, (3) setting the Ground Lift switch, (4) mounting
the 9400 in a rack, (5) connecting inputs, outputs and power, (6) optional connecting
of remote control leads and (7) optional connecting of computer interface
control leads.
When you have finished installing the 9400, proceed to “Quick Setup,” on page 2-
16.
DO NOT connect power to the unit yet!
1. Unpack and inspect.
If you note obvious physical damage, contact the carrier immediately to make a
damage claim. Packed with the 9400 are:
2ea. Line Cords (domestic, European)
2ea. Fuses (½-A-250V Slow-Blow for 115V; 500mA-250V for 230V)
2ea. Fuse holders (gray for 115V fuses and black for 230V fuses)
4ea. Rack-mounting screws, 10-32 x ½ — with washers, #10
1ea. Null modem cable (for software upgrades and PC Remote connection)
1ea. PC Remote Software and Operating Manual CD
Save all packing materials! If you should ever have to ship the 9400 (e.g., for servicing),
it is best to ship it in the original carton with its packing materials because
both the carton and packing material have been carefully designed to protect
the unit.
Complete the Registration Card and return it to Orban. (please)
The Registration Card enables us to inform you of new applications, performance
improvements, software updates, and service aids that may be
developed, and it helps us respond promptly to claims under warranty
without our having to request a copy of your bill of sale or other proof
of purchase. Please fill in the Registration Card and send it to us today.
(The Registration Card is located after the cover page).
Customer names and information are confidential and are not sold to
anyone.