Optimod-AM 9400 V1.2 Operating Manual - Orban

OPTIMOD-AM DIGITAL INSTALLATION 2-75
2. Launch a Windows 2000 Modem connection.
Once you have set up a “connection” specifying a modem connection in the 9400
PC Remote application (see To set up a new connection on page 3-61), choosing
this connection from 9400 PC Remote automatically opens a Windows modem
connection to your 9400.
You can connect by selecting the desired connection from
the drop-down list in the CONNECT menu.
You can also connect by double-clicking the connection in
the “Connection List” window.
If the connection is successful, a dialog bubble will appear
on the bottom right hand corner of the screen verifying
your connection.
If you have trouble making a connection, refer to OS Specific Troubleshooting
Advice: Troubleshooting Windows 2000 Modem Connect on page 5-10. If you
have trouble the first time after creating a connection according to the instructions
above, try restarting your computer to clear its serial port.
3. To change the properties of an existing connection:
Right-click the connection in the “connection List” window and choose “Properties.”
The “Connection properties” window opens (see page 2-71).
Connecting using Windows XP Modem Connection
1. Add and configure modem for Windows XP:
Skip this step if your modem is already configured and working.
A) Configure the Windows XP PC ports:
Use either an internal modem or external modem with your computer.
a) If you are using an external modem, connect the modem to a serial port on
your PC.
b) Make sure the modem is connected to a working phone line.
c) Click “Start / Control Panel / Systems.”
d) Go to the “Hardware” tab and click “Device Manager.”
e) In the Device Manager dialog box click the “+” next to the “Ports (COM
and LPT)” icon.
A list will branch off, showing your available ports.
f) Double-click “Communications Port (COM1) or (COM2),” depending on
how you set up your system.
The “Communications Port (Comx) Properties” dialog box opens.