Optimod-AM 9400 V1.2 Operating Manual - Orban

3-66
OPERATION ORBAN MODEL 9400
a) Set the FILES OF TYPE field to the Automation file type (*.orb94autom)
b) Select the desired automation file in the dialog box
c) Click the RESTORE button.
G) Click DONE to dismiss the RESTORE dialog box.
To share an archived User Preset between 9400s:
A) Navigate to the directory containing the desired User Preset from within the
RESTORE FROM PC dialog box
B) Click the RESTORE button.
This User Preset will be downloaded to the 9400 to which 9400 PC Remote
is currently connected.
If the User Preset is encrypted, PC Remote will request its password.
To modify INPUT/OUTPUT and SYSTEM SETUP:
Choose SETUP from the TOOLS menu.
To set a control, click it (it will become highlighted) and then use the wheel on
the mouse to adjust it. You can also use the + and – keys on the numeric keypad
to adjust any control.
To modify AUTOMATION:
C) Choose AUTOMATION from the TOOLS menu.
An Automation Dialog box will open.
D) Click the NEW EVENT to create a new event.
Controls to set the event type and time are available on the right hand
side of the dialog box.
E) Check the ENABLE AUTOMATION check box at the top of the dialog box to enable
automation.
To group multiple 9400s:
Right-click ALL CONNECTIONS in the Connections List and select NEW GROUP.
You can add multiple 9400s to a single group to help organize a network
of 9400s. However, only one 9400 from within a group can be connected
to 9400 PC Remote at any one time.
Navigation Using the Keyboard
In general, PC Remote uses standard Windows conventions for navigation.