SERVICE MANUAL - Alarko Carrier
SERVICE MANUAL - Alarko Carrier
SERVICE MANUAL - Alarko Carrier
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
No.<br />
Part name<br />
Procedures<br />
Remarks<br />
4<br />
Horizontal louver<br />
1) Remove shaft of the horizontal<br />
louver from the back body.<br />
(First remove the left shaft, and<br />
then remove other shafts while<br />
sliding the horizontal louver<br />
leftward.)<br />
Slide the horizontal<br />
louver leftward<br />
5 Evaporator<br />
(Heat exchanger)<br />
1) Follow to the procedure in the item 3 .<br />
2) Remove the pipe holder from the rear side of the main unit.<br />
3) Remove two fixing screws at the left side of the end plate of the heat exchanger.<br />
Pipe holder<br />
Screw<br />
Screw<br />
Disengage the claw<br />
4) Remove the heat exchanger fixing holder<br />
by removing the two fixing screws used to<br />
secure it.<br />
Screw<br />
Heat exchanger<br />
fixing holder<br />
Screw<br />
5) Remove right side of the end plate from<br />
two fixing ribs while sliding slightly the<br />
heat exchanger rightward.<br />
Hanged part<br />
– 111 –