31603 - Innova Pro

Using the Scan ToolVIEWING ENHANCED DTCs• If a Manufacturer specific DTC was retrieved,and the manufacturer selected for the codewas not Chrysler, Jeep, Ford, Mazda,General Motors, Isuzu, Honda, Acura,Toyota or Lexus, the message “This vehicledoes not support Enhanced communication”displays. Press the button to return tothe Enhanced Menu. Enhanced data is notavailable for your vehicle.To view Enhanced DTCs: Select EnhancedDTCs from the Enhanced Main Menu (thenchoose the appropriate manufacturer ifprompted). Refer to VIEWING ENHANCEDDTCs on page 40 to view enhanced DTCs foryour vehicle.To view ABS DTCs: Select ABS DTCs fromthe Enhanced Main Menu (then choose theappropriate manufacturer if prompted). Referto VIEWING ABS DTCs on page 48 to viewABS DTCs for your vehicle.To view SRS DTCs: Select SRS DTCs fromthe Enhanced Main Menu (then choose theappropriate manufacturer if prompted). Referto VIEWING SRS DTCs on page 51 to viewSRS DTCs for your vehicle.VIEWING ENHANCED DTCsRefer to the appropriate paragraph to view enhanced data for yourvehicle:• Chrysler/Jeep......................................... page 40• Ford/Mazda............................................ page 42• GM/Isuzu................................................ page 44• Honda/Acura .......................................... page 45• Toyota/Lexus ......................................... page 47Chrysler/Jeep Enhanced DTCsWhen the Scan Tool enters the “enhanced” mode (and Chrysler/Jeepis selected, if prompted), the Chrysler Enhanced menu displays. Youmay view either “Engine DTCs” or “Transmission DTCs.”1. Use the UP and DOWN buttons, as necessary, to highlightthe desired option, then press the ENTER button.40 CarScan+ ABS/SRS