11.07.2015 Views

31603 - Innova Pro

31603 - Innova Pro

31603 - Innova Pro

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Using the Scan ToolVIEWING ENHANCED DTCs• If the Continuous Memory or KOEOtest was selected, turn the ignition OFF,then back ON. Press the ENTERbutton to start the test.- A “One moment please” messagedisplays while the test is in progress.• If the KOER test was selected, pressthe ENTER button to continue.- A “One moment please” messagedisplays while the test is in progress.- Turn the steering wheel to the right,then release.- Press and release the brake pedal.- Cycle the overdrive switch (ifequipped).3. To read the display:Refer to DISPLAY FUNCTIONS on page 8 for a description ofLCD display elements.• A visible icon indicates that theScan Tool is being powered throughthe vehicle’s DLC connector.• The upper right hand corner of thedisplay shows the number of the codecurrently being displayed, the totalnumber of codes retrieved.• The Diagnostic Trouble Code (DTC)and related code definition are shownin the lower section of the LCD display.I/M MONITOR STATUS icons are not displayed whenviewing enhanced DTCs.In the case of long code definitions, or when viewingFreeze Frame data, a small arrow is shown in theupper/lower right-hand corner of the code display areato indicate the presence of additional information. Usethe and buttons, as necessary, to view theadditional information.• The Scan Tool will display a code onlyif codes are present in the vehicle’scomputer memory. If no codes arepresent, a “No Enhanced DTC’s arepresently stored in the vehicle’scomputer” is displayed. Press thebutton to return to theFord/Mazda Enhanced menu.CarScan+ ABS/SRS 43

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!