31603 - Innova Pro

More documents

Recommendations

Info

About the Scan ToolBATTERY REPLACEMENTOn some Asian and European vehicles the DLC is locatedbehind the “ashtray” (the ashtray must be removed toaccess it) or on the far left corner of the dash. If the DLCcannot be located, consult the vehicle’s service manual forthe location.BATTERY REPLACEMENTReplace batteries when the battery symbol is visible on displayand/or the 3 LEDS are all lit and no other data is visible on screen.1. Locate the battery cover on the back of the Scan Tool.2. Slide the battery cover off (use your fingers).3. Replace batteries with three AA-size batteries (for longer life, useAlkaline-type batteries).4. Reinstall the battery cover on the back of the Scan Tool.Adjustments After Battery InstallationThe first time the Scan Tool is turned on, you must select the desireddisplay language (English, French or Spanish) and unit of measurement(USA or Metric) as follows:1. Press the POWER/LINK button toturn the Scan Tool “ON.”• The Select Language screen displays.2. Use the UP and DOWN buttons,as necessary, to highlight the desireddisplay language.3. When the desired display language isselected, press the ENTER button toconfirm your selection.• The Select Unit screen displays.4. Use the UP and DOWN buttons,as necessary, to highlight the desired unitof measurement.5. When the desired unit of measurement isselected, press the ENTER button toconfirm your selection.After the initial language and unit of measurement selectionsare performed, these, as well as other settings, can bechanged as desired. <strong>Pro</strong>ceed to “ADJUSTMENTS ANDSETTINGS” on page 76 for further instructions.6 CarScan+ ABS/SRS
Scan Tool ControlsCONTROLS AND INDICATORSCONTROLS AND INDICATORS812910117123456Figure 1. Controls and IndicatorsSee Figure 1 for the locations of items 1 through 12, below.1. ERASE button - Erases Diagnostic Trouble Codes (DTCs),and “Freeze Frame” data from your vehicle’s computer, and resetsMonitor status.2. ENTER button - When in MENU mode, confirms the selectedoption or value.3. button - Displays the DTC View screen and/or scrolls theLCD display to view DTCs and Freeze Frame data.4. POWER/LINK button - When the Scan Tool IS NOTconnected to a vehicle, turns the Scan Tool “On” and “Off”. Whenthe Scan Tool is connected to a vehicle, links the Scan Tool to thevehicle’s PCM to retrieve diagnostic data from the computer’smemory.To turn the Scan Tool "On", you must press and hold thePOWER/LINK button for approximately 3 seconds.5. button – When pressed while linked to a vehicle, places theScan Tool in "Live Data" mode. When pressed and held while linkedto a vehicle, displays the “Mode Selection Menu.”CarScan+ ABS/SRS 7
Page 2 and 3: Table of ContentsINTRODUCTIONWHAT I
Page 4 and 5: You Can Do It!EASY TO USE - EASY TO
Page 6 and 7: Safety PrecautionsSAFETY FIRST!To p
Page 10 and 11: Scan Tool ControlsDISPLAY FUNCTIONS
Page 12 and 13: Scan Tool ControlsDISPLAY FUNCTIONS
Page 14 and 15: Onboard DiagnosticsCOMPUTER ENGINE
Page 16 and 17: Onboard DiagnosticsCOMPUTER ENGINE
Page 18 and 19: Onboard DiagnosticsDIAGNOSTIC TROUB
Page 20 and 21: Onboard DiagnosticsDIAGNOSTIC TROUB
Page 22 and 23: Onboard DiagnosticsOBD2 MONITORSNon
Page 24 and 25: Onboard DiagnosticsOBD2 MONITORSthe
Page 26 and 27: Onboard DiagnosticsOBD2 MONITORSexh
Page 28 and 29: Onboard DiagnosticsOBD2 MONITORSPM
Page 30 and 31: Preparation for TestingPRELIMINARY
Page 32 and 33: Preparation for TestingPRELIMINARY
Page 34 and 35: Preparation for TestingVEHICLE SERV
Page 36 and 37: Using the Scan ToolCODE RETRIEVAL P
Page 42 and 43: Using the Scan ToolVIEWING ENHANCED
Page 50 and 51: Using the Scan ToolVIEWING ABS DTCs
Page 52 and 53: Using the Scan ToolVIEWING ABS DTCs
Page 54 and 55: Using the Scan ToolVIEWING SRS DTCs
Page 56 and 57: Using the Scan ToolERASING DIAGNOST
Page 58 and 59:
Using the Scan ToolI/M READINESS TE
Page 60 and 61:
Using the Scan ToolI/M READINESS TE
Page 62 and 63:
Using the Scan ToolABOUT REPAIRSOLU
Page 64 and 65:
Live Data ModeVIEWING LIVE DATAThe
Page 66 and 67:
Live Data ModeRECORDING (CAPTURING)
Page 68 and 69:
Live Data ModeRECORDING (CAPTURING)
Page 70 and 71:
Live Data ModeLIVE DATA PLAYBACK•
Page 72 and 73:
Additional TestsSPECIAL TEST MENUIn
Page 74 and 75:
Additional TestsSPECIAL TEST MENU6.
Page 76 and 77:
Additional TestsVIEWING VEHICLE INF
Page 78 and 79:
Additional TestsADJUSTMENTS AND SET
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Generic (Global) OBD2 PID ListToolD
Page 86 and 87:
Generic (Global) OBD2 PID ListToolD
Page 88 and 89:
Vehicle Applications - Makes Covere
Page 90 and 91:
GlossaryGLOSSAY OF TERMS AND ABBREV
Page 92 and 93:
Notes90 CarScan+ ABS/SRS
Page 94 and 95:
Notes92 CarScan+ ABS/SRS
show all

31603 - Innova Pro

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?