31603 - Innova Pro

Live Data ModeRECORDING (CAPTURING) LIVE DATA2. Use the UP and DOWN buttons,as necessary, to highlight Live DataMenu, then press the ENTER button.• The “Live Data” menu displays.3. Use the UP and DOWN buttons,as necessary, to highlight “Record LiveData”, then press the ENTER button.4. Use the UP and DOWN buttons,as necessary, to highlight “Record by DTCtrigger”, then press the ENTER button.• If DTCs are presently stored in thevehicle’s computer, an advisorymessage displays. Use the UPand DOWN buttons, as necessary,to highlight Erase DTCs, then pressthe ENTER button to erase DTCsfrom the vehicle’s computer. When theErase process is complete, the“Record by DTC Trigger” screendisplays.5. When the "Record by DTC Trigger" screen displays, select thedesired trigger point as follows:The Scan Tool is capable of recording approximately 100 framesof Live Data. Record by DTC trigger lets you select the point intime at which you wish the Scan Tool to begin recording Live Data.You can set the trigger point to record the 100 frames of databefore an event (when the DTC sets), after the event, or in themiddle (50 frames before and 50 frames after the event.• Beginning - records approximately100 frames of Live Data after the DTCsets.• Middle - records approximately 50frames of Live Data before and 50frames after the DTC sets.• End - records approximately 100frames of Live Data before the DTCsets.6. Use the UP and DOWN buttons,as necessary, to select the desired triggerpoint, then press the ENTER button.• A "One moment please. . ." messageshows on the display. When the ScanTool is ready to record Live Data, the"Record Live Data" screen displays.CarScan+ ABS/SRS 65