31603 - Innova Pro

About the Scan ToolBATTERY REPLACEMENTOn some Asian and European vehicles the DLC is locatedbehind the “ashtray” (the ashtray must be removed toaccess it) or on the far left corner of the dash. If the DLCcannot be located, consult the vehicle’s service manual forthe location.BATTERY REPLACEMENTReplace batteries when the battery symbol is visible on displayand/or the 3 LEDS are all lit and no other data is visible on screen.1. Locate the battery cover on the back of the Scan Tool.2. Slide the battery cover off (use your fingers).3. Replace batteries with three AA-size batteries (for longer life, useAlkaline-type batteries).4. Reinstall the battery cover on the back of the Scan Tool.Adjustments After Battery InstallationThe first time the Scan Tool is turned on, you must select the desireddisplay language (English, French or Spanish) and unit of measurement(USA or Metric) as follows:1. Press the POWER/LINK button toturn the Scan Tool “ON.”• The Select Language screen displays.2. Use the UP and DOWN buttons,as necessary, to highlight the desireddisplay language.3. When the desired display language isselected, press the ENTER button toconfirm your selection.• The Select Unit screen displays.4. Use the UP and DOWN buttons,as necessary, to highlight the desired unitof measurement.5. When the desired unit of measurement isselected, press the ENTER button toconfirm your selection.After the initial language and unit of measurement selectionsare performed, these, as well as other settings, can bechanged as desired. Proceed to “ADJUSTMENTS ANDSETTINGS” on page 76 for further instructions.6 CarScan+ ABS/SRS