31603 - Innova Pro

Using the Scan ToolVIEWING ENHANCED DTCsTransmission DTCs are not supportedon most Chrysler/Jeep vehiclesmanufactured prior to 2002.• A “One moment please” messagedisplays while the Scan Tool retrievesthe selected DTCs.• If the Scan Tool fails to link to thevehicle’s computer, a “Linking Failed”message shows on the Scan Tool’sdisplay.- Verify the ignition is ON, then pressthe POWER/LINK button tocontinue.2. To read the display:Refer to DISPLAY FUNCTIONS onpage 8 for a description of LCDdisplay elements.• A visible icon indicates that theScan Tool is being powered throughthe vehicle’s DLC connector.• The upper right hand corner of thedisplay shows the number of the codecurrently being displayed, the totalnumber of codes retrieved.• The Diagnostic Trouble Code (DTC)and related code definition are shownin the lower section of the LCD display.I/M MONITOR STATUS icons are not displayed whenviewing enhanced DTCs.In the case of long code definitions, or when viewingFreeze Frame data, a small arrow is shown in theupper/lower right-hand corner of the code display areato indicate the presence of additional information. Usethe and buttons, as necessary, to view theadditional information.• The Scan Tool will display a code only ifcodes are present in the vehicle’scomputer memory. If no codes arepresent, a “No Enhanced DTC’s arepresently stored in the vehicle’scomputer” is displayed. Press thebutton to return to the Chrysler Enhancedmenu.3. If more than one code was retrieved press the button, asnecessary, to display additional codes one at a time.CarScan+ ABS/SRS 41