31603 - Innova Pro

Safety PrecautionsSAFETY FIRST!SAFETY FIRST!To avoid personal injury, instrument damage and/ordamage to your vehicle; do not use the Scan Tool beforereading this manual.This manual describes common test procedures usedby experienced service technicians. Many test proceduresrequire precautions to avoid accidents that can result inpersonal injury, and/or damage to your vehicle or testequipment. Always read your vehicle's service manual andfollow its safety precautions before and during any test orservice procedure. ALWAYS observe the following generalsafety precautions:When an engine is running, it produces carbon monoxide,a toxic and poisonous gas. To prevent serious injury ordeath from carbon monoxide poisoning, operate thevehicle ONLY in a well-ventilated area.To protect your eyes from propelled objects as well as hotor caustic liquids, always wear approved safety eyeprotection.When an engine is running, many parts (such as thecoolant fan, pulleys, fan belt etc.) turn at high speed. Toavoid serious injury, always be aware of moving parts.Keep a safe distance from these parts as well as otherpotentially moving objects.Engine parts become very hot when the engine is running.To prevent severe burns, avoid contact with hot engineparts.PRNDLBefore starting an engine for testing or troubleshooting,make sure the parking brake is engaged. Put thetransmission in park (for automatic transmission) orneutral (for manual transmission). Block the drive wheelswith suitable blocks.Connecting or disconnecting test equipment when theignition is ON can damage test equipment and thevehicle's electronic components. Turn the ignition OFFbefore connecting the Scan Tool to or disconnecting theScan Tool from the vehicle’s Data Link Connector (DLC).CarScan+ ABS/SRS 3