31603 - Innova Pro

Live Data ModeRECORDING (CAPTURING) LIVE DATA• The "Custom Live Data" menu displays,with the first PID in the menuhighlighted.4. Use the UP and DOWN buttonsto scroll through the available PIDs. Whenthe PID you wish to display is highlighted,press the ENTER button to select it (a"checkmark" will show in the checkbox tothe right of the PID to confirm yourselection). Repeat the procedure until onlythe PIDs you want to display have all been selected.• To deselect a currently selected PID, highlight the PID, thenpress the ENTER button. The checkmark will be removedfrom the checkbox.5. When you are finished making your selection(s), scroll to the end ofthe PID list and highlight the word DONE, then press the ENTERbutton.• The Scan Tool is now in "Custom Live Data" mode. Only thePIDs you selected are shown on the Scan Tools display.6. To exit the "Custom Live Data" mode, press the button untilthe “Main Menu” displays.RECORDING (CAPTURING) LIVE DATAYou can record and save several frames of Live Data information foreach PID supported by the vehicle in the Scan Tool's memory.Recorded Live Data can serve as valuable information to help you in thetroubleshooting of vehicle problems.There are two ways that the Scan Tool can "record" Live Data:• Record by DTC Trigger• Record by Manual TriggerIf the POWER/LINK button is pressed at any time whilein Live Data mode, any stored (recorded) Live Data will becleared (erased) from the Scan Tool’s memory.Record by DTC TriggerThis function automatically records (captures) Live Data informationwhen a DTC sets and saves it in the Scan Tool’s memory. The recorded(captured) data can be a valuable troubleshooting aid, particularly if youare experiencing a fault that is causing a DTC to set.1. While linked to the vehicle, start the engine,then press and release the button.• The “Main Menu” displays.64 CarScan+ ABS/SRS