Modifications for the ICOM - RogerK

This modification is read 270 times.top of page19-07-1998(IC-P2AT) ICOM P2AT keyboard modsThere was a recent posting requesting mods to the ICOM P2AT. I received the following info from ICOM Customer Service andthey work fine on my P2AT:To enable wideband receive and direct keyboard entry of the entire frequency:with the HT off, hold down "Light" "B" and "#" keys and turn the HT onGet into the set mode and you will have a new option labeled "PL". Turn the upper right knob to change this to a value of 100.(The rep at ICOM said "PL" stands for "decimal placement")Get out of set modeYou should now be able to enter VFO mode and just press seven digit keys to enter any freq directly. I don't have mine with menow, but I think you can enter any freq from 0 to 1GHz (within PLL Lock range).Dave Meer, N6KEFThis modification is read 499 times.top of page02-11-1999(IC-P2ET) Sensitivity for the Icom IC-P2ETUHF410 MHz unlock415 MHz 6µV420 MHz 1,6µV425 MHz 0,3µV430 MHz 0,2µV435 MHz 0,2µV440 MHz 0,2µV450,10 MHz 0,6µV465,10 MHz 12µV470,10 MHz 17µV475,10 MHz 30µVVHF112,4 MHz AM 1µV118,45 MHz AM 0,6µV131,125 MHz AM 0,5µV137,5 MHz FM 0,5µV145,5 MHz FM 0,15µV155,5 MHz FM 0,15µV160,5 MHz FM 0,15µV165,5 MHz FM 0,2µV170,5 MHz FM 0,3µV175,5 MHz FM 2,5µVThis modification is read 411 times.top of page