Modifications for the ICOM - RogerK

1. Change to RECEIVER MODE (not receive mode) 75 - 106 MHz (FM)2. FUNC + PTT (working in RECEIVER MODE) 108 - 130 MHz (AM)138 - 169 MHz (FM)Note: (+)174 - 192 MHz (FM)1. keep pushing each key at same time, 204 - 243 MHz (FM)2. switch on equipment, 250 - 291 MHz (FM)3. hold (about 4sec.) until "SET" appear, 310 - 370 MHz (FM)4. release keys and requested mode appear;Easily tunning step change (5 - 50 KHz):1. push and hold FUNC key for 2sec.2. rotate TUNING CONTROL.3. Push FUNC to return to previous mode.Frequency ranges are appoximately and not garantied. Receiver sensitivity garantied only in HAM-Band (144 - 146 MHz).In RECEIVER Mode equipment running exclusively as a Receiver, cannot transmit at all.Achtung:nur fu:r den Fachha:ndler zum Zwecke des Service bestimmt. Es mu:ssen die Bestimmungen des Fernmelde-Anlagengesetzheachtet werden.This modification is read 1063 times.top of page19-07-1998(IC-2SAT) IC-2SA/E Frequency range expantion●●Remove any diode position on D6Install diode DA (code No. 1750000160) position D6After this modification frequency lock range will be expand typicaly :RX (MHz) : 108 - 140 (AM) , 138-169 (FM) , 310-370 (FM) ,TX (MHz) : 139 - 163 (FM) ,-------------------------------------------------| || || || || R R || 3 3 || 9 8 || o || R R R ###