Modifications for the ICOM - RogerK

More documents

Recommendations

Info

IC-M9 - Hold [HI/LO] & [DW/SCAN] buttons and turn the radio on. Wait until CH 16displays on the LCD.IC-M10 - Clone with a computer.IC-M11 - Turn the radio on, hold [LIGHT] & [FUNCTION] buttons, turn the radio off, thenturn back on. Release the buttons after the display returns to normal.IC-M15 - Hold [HI/LO] & [CALL] & [DUAL] buttons and turn the radio on.IC-GM1500 - Clone with a computer.M O B I L E S:IC-M45 - Clone with a computer.IC-M45A - Clone with a computer.IC-M55/B - Remove the plastic screw from the bottom cover and push the reset buttonunderneath the screw.IC-M56 - Turn the radio on, hold [CH16] & [MR] buttons, turn off, then turn the radio onagain and release the buttons.IC-M57 - Hold [CH16] & [HI/LO] buttons and turn the radio on. Hold the buttons forapproximately 3 seconds after the radio comes back on.IC-M58 - Clone with a computer.IC-M59 - Clone with a computer.IC-M80 - Disconnect the lithium battery, ground all CPU pins to chassis.IC-M100 - Turn the radio on, hold the squelch knob and press [RESET]IC-M120 - Turn the radio on, hold [CH16] & [USA], turn the radio off and then back on.IC-M125 - Hold [FUNC] & [CH16] buttons and turn the radio off and back on.IC-M126 - Hold [FUNC] & [CH16] buttons and turn the radio off and back on.IC-M127 - Clone with a computer.IC-M500 - Hold [DIMMER] & [13/67] buttons and turn the radio on.N A V I G A T I O N:FF-88 - No reset available.FP-561 - Hold [MENU] button, turn the unit on, choose "all reset" and turn the unit off.MR-40 - No reset available.MR-61 - No reset available.MR-610 - No reset available.S S B R A D I O S:IC-M600 - Hold [FUNCTION] & [CE] and turn the radio on.IC-M700 - CPU reset not available.IC-M700PRO - Clone with a computer.IC-M710 - Clone with a computer.IC-M710RT - Clone with a computer.IC-M800 - Remove DC power from both the control head and the main unit. Waitapproximately 5 minutes.IC-M810 - Remove DC power from both the control head and the main unit. Waitapproximately 5 minutes.Avionics:H A N D H E L D S:IC-A2 - Push [F] & [PTT] buttons and turn the radio on.IC-A3 - Hold [F] & [0] & [ENT] buttons and turn the radio on.IC-A4 - No keypad reset, clone with a computer.IC-A20 - Push [F] & [CLEAR] buttons and turn the radio on.IC-A21 - Push [F] & [CLEAR] buttons and turn the radio on.IC-A22 - Hold [F] & [0] & [ENT] buttons and turn the radio on.G R O U N D / M O B I L E:IC-A110 - Clone with a computer.IC-A200B/M - No CPU reset.P A N E L M O U N T:IC-A200 - No CPU reset.Land mobile:P O R T A B L E S:IC-F3 - RecloneIC-F3G - RecloneIC-F3S - RecloneIC-F4 - RecloneIC-F4G - RecloneIC-F4S - RecloneIC-F4TR - RecloneIC-F10 - RecloneIC-F20 - RecloneIC-F30 - RecloneIC-F30LT - RecloneIC-F40 - RecloneIC-F40LT - RecloneIC-H8 - Reclone or hold [PTT] & [CLONE] buttons and turn the radio on.IC-H10 - Reclone or hold [PTT] & [CLONE] buttons and turn the radio on.IC-H16 - Reclone
IC-H18 - RecloneIC-H19 - RecloneIC-U8 - Hold [PTT] & [CLONE] buttons and turn the radio on.IC-U10 - Hold [PTT] & [CLONE] buttons and turn the radio on.IC-U16 - RecloneIC-U18 - RecloneIC-U19 - RecloneM O B I L E S:IC-F320 - RecloneIC-F320S - RecloneIC-F420 - RecloneIC-F420S - RecloneIC-F1020 - RecloneIC-F2020 - RecloneIC-U200 - RecloneIC-U220 - RecloneIC-U400 - RecloneIC-V100 - RecloneIC-V200 - RecloneIC-V220 - RecloneR E P E A T E R S:IC-RP1620 - Turn the power off, wait a few minutes and turn the power back on.IC-RP4520 - Turn the power off, wait a few minutes and turn the power back on.IC-UR8050 - Turn the power off, wait a few minutes and turn the power back on.This modification is read 2049 times.top of page13-05-2001(MISC) Use ICOM SM-20 Mic to Yaesu ,Kenwood, etc.Author: Robert - jg999@webtv.net.MODIFICATION.NETWell here is a neat mod for the ICOM SM-20 microphone that allows you to use the mic with a non Icon transceiver (Yaesu orKenwood or any other with proper wiring).To install the 9volt battery you must remove the weight inside the mic (to make room for the battery ) . now you need to buy abattery end for the battery (Radio Shack #270-324 at $1.89 and some velcro to hold the battery in Radio hack #64-2345 at$2.69).Now there is a plug inside the mic that is connected to the mic cord, cut the RED wire (as far away from the plug as possible)and connect it to the battery POSITIVE lead. Take the NEGATIVE lead from he battery and splice it into the BLACK wire (in thecable). To make sure the battery won't run down (when the transceiver is'nt keyed) you must take take mic plug apart and putthe wire that is on pin #7 (witch is the mic ground and put it with the wire on pin #5 witch is the PTT ).One last thing, with this MOD be sure to take the wire off pin #2 (witch is the red wire that would normally apply 8volts from anICOM transceiver). I have mine modified like this and it works great.Robert.This modification is read 1387 times.top of page03-11-2001(MISC) Icom Hex AddressesMODEL HEXIC-07 3EIC-R72 32IC-75 5AIC-127A 18IC-127E 18IC-271 20IC-275A 10IC-275E 10
Page 1 and 2:
Modifications for the ICOMcreated 2
Page 3 and 4:
(IC-271)(IC-271)(IC-271)(IC-2710)(I
Page 5 and 6:
(IC-475)(IC-475)(IC-475)(IC-475)(IC
Page 7 and 8:
(IC-756pro) Expand tx-freqeuncy for
Page 9 and 10:
(IC-W2E)(IC-W31)(IC-W31)(IC-W31)(IC
Page 11 and 12:
2. After about 0.5 second, press st
Page 13 and 14:
21-10-1999(AT-500) ICOM AT-500 Tune
Page 15 and 16:
4. Program the radio to the local w
Page 17 and 18:
19-07-1998(IC-03) ICOM 02/03/04 & V
Page 19 and 20:
This modification is read 553 times
Page 21 and 22:
6. Reinstall the RAM board into the
Page 23 and 24:
27-10-1998(IC-1275) Power control m
Page 25 and 26:
27-10-1998(IC-1275) Modification of
Page 27 and 28:
●Connect the short plug end with
Page 29 and 30:
This modification is read 1316 time
Page 31 and 32:
50MHz to something like 204MHz cont
Page 33 and 34:
26-07-2001(IC-207) Band Expansion f
Page 35 and 36:
Page 37 and 38:
Fig. 3: The circuit extract from IC
Page 39 and 40:
19-07-1998(IC-22) Icom IC22S Packet
Page 41 and 42:
Page 43 and 44:
More detailed:In the true spirit of
Page 45 and 46:
19-07-1998(IC-229) IC-229H Fix CPU/
Page 47 and 48:
In addition, if you want to put an
Page 49 and 50:
By diode:●●Remove D17 diode on
Page 51 and 52:
1. Remove diode D14 (if there is an
Page 53 and 54:
cut... I'm guessing, but it could b
Page 55 and 56:
19-07-1998(IC-24) IC-24AT enabling
Page 57 and 58:
19-07-1998(IC-24) Tip to to functio
Page 59 and 60:
This complete the mods done with su
Page 61 and 62:
Page 63 and 64:
Comment:These TRX is accorded to my
Page 65 and 66:
this mod of use as I have.Any comme
Page 67 and 68:
other wires come in. Take the cable
Page 69 and 70:
17-11-2000(IC-2700) Enabling ICOM 2
Page 71 and 72:
19-07-1998(IC-271) IC-271 / 471 fue
Page 73 and 74:
RAM card version B images:This modi
Page 75 and 76:
12-11-2000(IC-2710) Crossband Repea
Page 77 and 78:
Note:From Bill K7RIEICOM has not tr
Page 79 and 80:
19-07-1998(IC-275) Improve the stab
Page 81 and 82:
●●●●●●●●●●remov
Page 83 and 84:
Note: a strong signal will be serio
Page 85 and 86:
19-07-1998(IC-28) The long, noisy s
Page 87 and 88:
not a hard mod to do,..........but
Page 89 and 90:
02-04-2000(IC-2800) IC-2800H cross
Page 91 and 92:
19-07-1998(IC-281) Extended Receive
Page 93 and 94:
encased it in shrink-tube. The oper
Page 95 and 96:
push buttonswitch ^ ^| |___________
Page 97 and 98:
19-07-1998(IC-2IA) IC-2IA lousey xm
Page 99 and 100:
1. Change to RECEIVER MODE (not rec
Page 101 and 102:
13.0V 5.0W12.0V 5.0W11.0V 5.0W10.0V
Page 103 and 104:
Page 105 and 106:
MODIFICATION (Refer to figure 1.)1.
Page 107 and 108:
Procedure1. Remove the covers from
Page 109 and 110:
19-07-1998(IC-3200) Fix for IC-3200
Page 111 and 112:
4. select a frequency of 150.000Mhz
Page 113 and 114:
19-07-1998(IC-3220) How to iface Ic
Page 115 and 116:
Now power on and type in the freque
Page 117 and 118:
One note on the above - the BNC con
Page 119 and 120:
e shorted to ground and cause PLL u
Page 121 and 122:
19-07-1998(IC-451) IC-451 aus 9600F
Page 123 and 124:
3. If by accident you lose power to
Page 125 and 126:
19-07-1998(IC-475) IC-475 Freq. ste
Page 127 and 128:
Problem:This is a general transceiv
Page 129 and 130:
Note: a strong signal will be serio
Page 131 and 132:
Das spart einen mords Haufen Arbeit
Page 133 and 134:
Dieses ist mit dieser Schaltung als
Page 135 and 136:
Page 137 and 138:
X . X . 5.0 KHz 1 0 1 0. . . . X .
Page 139 and 140:
Remove the back cover. If you place
Page 141 and 142:
27-10-1998(IC-575) SSB RF GainProbl
Page 143 and 144:
26-06-2001(IC-575) Pass band Tuning
Page 145 and 146:
The trimpot leads will need to bent
Page 147 and 148:
19-07-1998(IC-706) Info/mods for IC
Page 149 and 150:
¦ ¦¦ ¦¦ ¦¦ ¦¦ ¦----------
Page 151:
●●●●●●●●●●●
Page 154 and 155:
From: gary@ke4zv.atl.ga.us (Gary Co
Page 156 and 157:
Mehr Dynamik in der Modulation beko
Page 158 and 159:
Operation:Be sure to read the manua
Page 160 and 161:
Alternative zum modifizierten PC St
Page 162 and 163:
●●●●●(Another receiver wi
Page 164 and 165:
| IC31 uPD4094BG || |1 2 3 4 |5 6 7
Page 166 and 167:
Page 168 and 169:
D116 and D118 are responsible for o
Page 170 and 171:
Transmit power output after modific
Page 172 and 173:
This information and photos was sup
Page 174 and 175:
22-02-2002(IC-706MKII) IC-706MKIIG
Page 176 and 177:
Page 178 and 179:
Delete cap. CT14 at pin 6 of IC3 on
Page 180 and 181:
18-06-2000(IC-729) Using two Icom r
Page 182 and 183:
19-07-1998(IC-735) IC-735 Remote Wo
Page 184 and 185:
19-07-1998(IC-736) Icom IC-736 DDS/
Page 186 and 187:
Also probably would apply to IC 735
Page 188 and 189:
RAM card version B images:This modi
Page 190 and 191:
John Schmitz NS8EAdditional informa
Page 192 and 193:
13-01-2002(IC-746) Monitor Audio Ou
Page 194 and 195:
Page 196 and 197:
19-07-1998(IC-751) IC-751 Bad Cap P
Page 198 and 199:
inspect your job to be sure that th
Page 200 and 201:
28-01-2002(IC-751) ICOM IC-751 Dual
Page 202 and 203:
Step 8: Turn the radio off and inst
Page 204 and 205:
To be neater you could remove the s
Page 206 and 207:
[W804] | |Remove=>[W805] | CHIP |[W
Page 208 and 209:
Date: 23-02-2002 User comment From:
Page 210 and 211:
less.The second way to adjust the I
Page 212 and 213:
23-11-2001(IC-756pro2) IC-756PRO2 T
Page 214 and 215:
19-07-1998(IC-765) Icom IC-765 Pass
Page 216 and 217:
19-07-1998(IC-775) New product info
Page 218 and 219:
70% AM.My personal findings are tha
Page 220 and 221:
11. Re-install board and all cables
Page 222 and 223:
The Yaesu FT726R first appeared ten
Page 224 and 225:
There seemed to be no way of changi
Page 226 and 227:
Add a diode on the blank position b
Page 228 and 229:
---- gar keine Diode ----Breitband
Page 230 and 231:
To disable the x-band repeater just
Page 232 and 233:
Well this should make things verry
Page 234 and 235:
Set radio in VFO mode, and select f
Page 236 and 237:
27-05-2001(IC-910) Expanded functio
Page 238 and 239:
●●●350-470 MHz RX/TX800-950 M
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
1. You're completely successful.2.
Page 246 and 247:
●●●●●●●●●Für Han
Page 248:
28-03-1999(IC-Q7) Modifying the ICO
Page 252 and 253:
●●●●●●●●Desoldering
Page 254 and 255: You should now have the RF board co
Page 256 and 257: This modification is read 2358 time
Page 258 and 259: BOOT:Attenuator protecs strong sign
Page 260 and 261: 1. Use an ohmmeter to determine whi
Page 262 and 263: 2. Remove battery cover and battery
Page 264 and 265: Fig. 4. Receiving AO-40 (at MA=13)O
Page 266 and 267: This modification can also be found
Page 268 and 269: The Q and not Q outputs on this IC
Page 270 and 271: Date: 30-12-2001 User comment From:
Page 272 and 273: This modification is read 3462 time
Page 274 and 275: Removing 1F unit1. Pull the 2 knobs
Page 276 and 277: 16-05-1999(IC-T8) Problem with the
Page 278 and 279: 800 -
Page 280 and 281: Frequencyrange after modification:5
Page 282 and 283: Offset Freq: Hold [FUNC], Press [4]
Page 284 and 285: This modification is read 866 times
Page 286 and 287: The Icom IC W21AT handi-talkie norm
Page 288 and 289: 19-07-1998(IC-W2A) IC-W2A signal le
Page 290 and 291: 19-07-1998(IC-W31) IC-W31E CROSS-BA
Page 292 and 293: 15-10-2000(IC-W31) Cross Band Repea
Page 294 and 295: could always try it.Set VHF and UHF
Page 296 and 297: 31-07-2001(IC-W32) Icom IC-W32A pro
Page 302 and 303: IC-4GAT - Turn the radio on, hold [
Page 306 and 307: IC-275H 10IC-375A 12IC-471 22IC-475
Page 308 and 309: I have tested this mod with a ic-75
Page 310 and 311: How further up the hole is the bett
Page 312 and 313: Connect the NTC, FAN and power and
Page 314 and 315: 5, 31, 48, and 79.4. Does the Prior
Page 316 and 317: 19-07-1998(R-7000) Modify your ICOM
Page 318 and 319: 1. C231 from 1000 pf to 68 pf.2. C2
Page 324 and 325: 19-07-1998(R-71) Tricking the ICOM
Page 326 and 327: There are two wires which send logi
Page 328 and 329: A. Remove the top cover of the rece
Page 330 and 331: 08-11-1998(R-7100) Modify your Icom
Page 332 and 333: 17-03-2002(R-7100) Icom R7100 Discr
Page 334: 23-08-1998(R-8500) Operating the Ic
show all

Modifications for the ICOM - RogerK

Create successful ePaper yourself

Delete template?

Save as template?