Digital Servo Amplifier SERVOSTAR 400 - BIBUS SK, sro
Digital Servo Amplifier SERVOSTAR 400 - BIBUS SK, sro
Digital Servo Amplifier SERVOSTAR 400 - BIBUS SK, sro
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Kollmorgen 07/03 Interfaces<br />
3.8.1 Connection of stepper motor controls with 5V signal level (X4)<br />
You can use this interface to connect the servo amplifier to a stepper motor control with a 5V signal<br />
level. The SubD connector X4 is used for this purpose.<br />
Limit frequency: 1 MHz<br />
AGND (terminal X3/1) must be connected to the ground of the control system!<br />
<strong>SERVOSTAR</strong> <strong>400</strong><br />
3.8.2 Connection of stepper motor controls with 24V signal level (X3)<br />
You can use this interface to connect the servo amplifier to a stepper motor control with a 24V signal<br />
level. The digital inputs DIGITAL-IN 1 and 2 on connector X3 are used for this purpose.<br />
Limit frequency: 100 kHz<br />
AGND (terminal X3/1) must be connected to the ground of the control system!<br />
<strong>SERVOSTAR</strong> <strong>400</strong><br />
<strong>SERVOSTAR</strong> ® <strong>400</strong> Installation manual 49