Digital Servo Amplifier SERVOSTAR 400 - BIBUS SK, sro

More documents

Recommendations

Info

Directives and Standards 07/03 Kollmorgen European Directives and Standards Servo amplifiers are components that are intended to be incorporated into electrical plant and machines for industrial use. When the servoamplifiers are built into machines or plant, the intended operation of the amplifier is forbidden until it has been established that the machine or plant fulfills the requirements of the EC Machinery Directive 98/37/EG and the EC Directive on EMC (89/336/EEC). To fulfill the EC Machinery directive (98/37/EG), the following standards have to be applied: EN 60204-1 (Safety and electrical equipment of machines) EN 292 (Safety of machines) The manufacturer of the machine must produce a hazard analysis for the machine and take appropriate measures to ensure that unforeseen movements do not result in personal injury or material damage. To fulfill the Low Voltage Directive 73/23/EEC, the following standards have to be applied: EN 60204-1 (Safety and electrical equipment of machines) EN 50178 (Equipment of high voltage plant with electronic devices) EN 60439-1 (Low-voltage switchgear and controlgear assemblies) To fulfill the EC EMC regulations (89/336/EEC), the following standards have to be applied: EN 61000-6-1 or EN 61000-6-2 (noise immunity within the domestic range/industrial range) EN 61000-6-3 or EN 61000-6-4 (noise emission within the domestic range/industrial range) The manufacturer of the machine or plant is responsible for ensuring that they meet the limits required by the EMC regulations. Advice on the correct installation for EMC – such as shielding, grounding, arrangement of connectors and cable routing – can be found in this documentation. The machine / plant manufacturer must examine whether with its machine / plant still further or other standards or EEC guidelines are to be used. Conformity Conformity with the EC Directive on EMC 89/336/EEC and the Low Voltage Directive 73/23/EEC is mandatory for servoamplifiers supplied within the European Union. To fulfill the EMC directive, the standard EN 61800-3 is applied. In the reference to noise immunity the servoamplifier fulfills the requirement to the category second environment (industrial environment). For the range of the noise emission the rvo amplifier fulfills the requirement to a product of the category reduced availability. Warning! This is a product with reduced availability according to IEC 61800-3. This product can cause interferences within domestic range; if required you must accomplish appropriate measures. The servo amplifiers have been tested by an authorized testing laboratory in a defined configuration with the system components which are described in this documentation. Any divergence from the configuration and installation described in this documentation means that you will be responsible for carrying out new measurements to ensure that the regulatory requirements are fulfilled. To fulfill the Low Voltage Directive, the standard EN 50178 has to be applied. 6 SERVOSTAR ® 400 Installation manual
Kollmorgen 07/03 UL and cUL- Conformance UL and cUL- Conformance In preparation SERVOSTAR ® 400 Installation manual 7
Page 1 and 2: www.DanaherMotion.com Digital Servo
Page 3 and 4: Kollmorgen 07/03 Contents Page Cont
Page 5: Kollmorgen 07/03 Safety Instruction
Page 9 and 10: Kollmorgen 07/03 General 1 General
Page 11 and 12: Kollmorgen 07/03 General 1.3 Namepl
Page 13 and 14: Kollmorgen 07/03 General 1.4.4 Digi
Page 15 and 16: Kollmorgen 07/03 General 1.5 Block
Page 17 and 18: Kollmorgen 07/03 General 1.7 Techni
Page 19 and 20: Kollmorgen 07/03 General 1.7.5 LED
Page 21 and 22: Kollmorgen 07/03 General 1.11 Switc
Page 23 and 24: Kollmorgen 07/03 Installation 2 Ins
Page 25 and 26: Kollmorgen 07/03 Installation 2.2.1
Page 27 and 28: Kollmorgen 07/03 Installation The f
Page 35 and 36: Kollmorgen 07/03 Installation 2.4 S
Page 37 and 38: Kollmorgen 07/03 Interfaces 3 Inter
Page 39 and 40: Kollmorgen 07/03 Interfaces 3.3 Ext
Page 41 and 42: Kollmorgen 07/03 Interfaces 3.5 Con
Page 43 and 44: Kollmorgen 07/03 Interfaces 3.5.3 D
Page 45 and 46: Kollmorgen 07/03 Interfaces 3.6 Enc
Page 47 and 48: Kollmorgen 07/03 Interfaces 3.7 RS2
Page 49 and 50: Kollmorgen 07/03 Interfaces 3.8.1 C
Page 51 and 52: Kollmorgen 07/03 Interfaces 3.9.2 C
Page 53 and 54: Kollmorgen 07/03 Interfaces 3.10.2
Page 55 and 56: Kollmorgen 07/03 Commissioning 4 Co
Page 57 and 58:
Kollmorgen 07/03 Commissioning 4.2
Page 59 and 60:
Kollmorgen 07/03 Commissioning 4.2.
Page 61 and 62:
Kollmorgen 07/03 Commissioning 4.4
Page 63 and 64:
Kollmorgen 07/03 Accessories 5 Acce
Page 65 and 66:
Kollmorgen 07/03 Accessories 5.3 Ex
Page 67 and 68:
Kollmorgen 07/03 Appendix 6 Appendi
Page 69 and 70:
Kollmorgen 07/03 Appendix Fault pos
Page 71 and 72:
Kollmorgen 07/03 Appendix P P-contr
Page 73 and 74:
Kollmorgen 07/03 Appendix This page
show all

Digital Servo Amplifier SERVOSTAR 400 - BIBUS SK, sro

Create successful ePaper yourself

Delete template?

Save as template?