SpaceGuard SRM - Tools4Ever.com

SpaceGuard SRMCLI Add QuotaTo add a quota using the Command Line Interface the following command needs to be entered:SgSRMCli ADD "" "[LIMIT]" "[LIMIT]" .... "[LIMIT]"where:COMPUTERDIRECTORYLIMITThe computer on which the SpaceGuard SRM service is running.Directory for which quotas need to be Added.Zero or more limits can be specified as:"Size,A([ALARM ACTION])A,A([ALARM ACTION])A"where:"Size" is the limitsize in MB. The highest limit will be the 100 percent limit.From zero up to two alarms can be specified.Specify alarm actions as: '(;[COUNT];[DELAY];[TYPE specific data])'. may be one of the following:COMMAND A commandline utility (e.g. executable,script,batch) will be executed whenthe limit is exceeded.[TYPE specific data]: command line (e.g. batch.bat)EMAILAn E-mail will be sent when the limit is exceeded.[TYPE specific data]: E-Mail addresses (seperated bycomma);[Subject];MessageEMAILMAPI An E-mail using MAPI will be sent when the limit is exceeded.[TYPE specific data]: E-Mail addresses (seperated bycomma);[Subject];MessageLOGAn entry in the application event log will be made when the limit isexceeded.[TYPE specific data]: MessagePAGERSMS A pager or SMS message will be sent when the limit is exceeded.[TYPE specific data]: Sender;Destination;MessagePOPUPA popup message will be sent when the limit is exceeded.[TYPE specific data]: Destinations (seperated by comma);MessageREVOKEACCESS Access to the directory will be revoked when the limit is exceeded and resetwhen the directory size drops below the limit.[TYPE specific data]: [NewOwner];User[COUNT] Number of times the alarm action will be repeated after the limit hastriggered.Enter 0 for no repetition or -1 for infinite repetitions. Default is 0.[DELAY] Delay in seconds between repetitions. Default is 5.Examples:a) Add a quota on a specific directory with quota size 10 MB and a pop-up alarm when limit isexceeded.command: SgSRMCli ADD F:\UserData\JSmith "10,A(POPUP;1;5;JSmith;Youexceeded the limit!)A"84