GPT-3000 SERIES - FLT Geosystems

8 LAYOUT7 When the display value dHR, dHD and dZ areequal to 0, the layout point is established.*3 )8 Press the [F2](NEZ) key.The coordinate data is shown.9 Press the [F4](NEXT) key to set next layout point .PT# is automatically incremented.[F2][F4]N * 100.000 mE : 100.000 mZ : 1.015 mMODE ANGLE NP/P NEXTLAYOUTPT#: LP-101INPUT LIST NEZ ENTER*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.*2) Point number could not be entered when data to comply with the coordinate value does not exist in thefile.*3) Cut & Fill displaying function is available . Refer to Chapter 16 “SELECTING MODE”.● Point Guide FunctionThe point guide function can be used while executing a Layout.Operating procedure Operation DisplayPT#:P1003HR: 6°20'40"dHR: 23°40'20"DIST --- NEZ ---10 Press the [F4](NEXT) key to set next layout point .PT# is automatically incremented.[F4]LAYOUTPT#: LP-101INPUT LIST NEZ ENTER1 After measuring Angle, Distance or Coordinate,press the [MENU] key.[MENU]POINTGUIDE[OFF]––– ––– [ON][OFF]2 Press the [F3](ON) or [MENU] key. [F3]or[MENU]POINTGUIDE[ON]––– ––– [ON][OFF]3 Press the [ESC] key to return to the previousdisplay.[ESC]PT#:P1003HR: 6°20'40"dHR: 23°40'20"DIST --- NEZ ---8-10