GPT-3000 SERIES - FLT Geosystems

1.6 Serial signal RS-232C connector1 NOMENCLATURE AND FUNCTIONSThe serial signal connector is used for connecting the GPT-3000 series with a computer or TOPCONData Collector, which enables the computer to receive measured data from the GPT-3000 series or tosend preset data of horizontal angle, etc. to it.●The following data will be output at each mode.ModeAngle mode ( V,HR or HL) ( V in percent)Horizontal distance mode (HR, HD, VD)Slope distance mode (V, HR,SD)Coordinate modeOutputV,HR (or HL)V,HR, HD, VDV,HR, SD,HDN, E, Z, HR (or V,H,SD,N,E,Z)●●The display and the output at the coarse mode are the same as the contents above.Output at the tracking mode is displayed as distance data only.The details necessary for the connection with the GPT-3000 Series are obtained from its InterfaceManual which is optionally available. Please refer to the manual.1-10