GPT-3000 SERIES - FLT Geosystems

4 DISTANCE MEASUREMENT6 Measure the second and third points in the sameway.CollimateP2[F1]PLANENN002#:PSD:mMEAS --- NP/P ---CollimateP3[F1]PLANENN003#:PSD:mMEAS --- NP/P ---The instrument calculates and displays coordinateand distance value of cross point betweencollimation axis and of the plane. *1),2)7 Collimate the edge (P0) of the plane. *3) ,4) CollimateP08 To show the slope distance (SD), press the []key.● Each time pressing the [ ] key, horizontaldistance, relative elevation and slope distance areshown in sequence.● To show coordinate of point P0, press the [ ]key.9 To escape the measuring, press the [F1](EXIT)key. The display returns to the previous mode.HR:HD:VD:EXITHR:HD:VD:EXITV :HR:SD:EXIT80°30'40"54.321 m N P10.000 m75°30'40"54.600 m N P-0.487 m90°30'40"75°30'40" N P56.602 m*1) In case the calculation of plane was not successful by the measured three points, error displays. Startmeasuring over again from the first point.*2) Data display is the mode beforehand of offset measurement mode.*3) Error will be displayed when collimated to the direction which does not cross with the determined plane.*4) The point height of the target point P0 is set to zero automatically4-12